What are the characteristics of servo presses?
Servo press is a device used to test the compressive strength of brick masonry. Different servo presses have different usage methods. Generally, non oil leaking presses are more commonly used in construction projects, and the structural characteristics of servo presses can be examined before use.
Firstly, the servo press is composed of four strong pull rods and ball head pads. Some servo presses are very high-end and equipped with digital displays or shock resistant pressure gauges. Even if there is thunder in the environment, the normal use of the servo press will not be affected. The upper and lower pressure plates of the servo press can effectively bear pressure, and generally need to be aligned downwards before effective parameters can be tested based on good parallelism and the test data can be analyzed.
Secondly, the use of servo presses is very convenient. The use of in-situ servo presses mainly achieves high-quality research and development by tightening the tension rod and tightening the oil drain valve. It is also necessary to check the number of times the hand pump rod is pressed in the pressure resistance setting, and to close some equipment that has not been turned off. When the hand pump rod is lifted upwards, attention should also be paid to the completion degree of the sealing ring. Generally, as long as it is worn, better products will be reconfigured.